- Must-Have Requirements Strong pipe welding experience using GTAW (TIG), MIG, and Flux Core Must pass a 2-inch Extra Heavy GTAW welding... test Must pass a 6G welding test for all required processes Must pass a 6-inch Flux Core fill and cap test Ability...
Test • 6-inch Schedule 80 Pipe • 6G Position • GTAW (TIG) Stringer / Root • GTAW Hot Pass • SMAW (Stick) Fill & Cap... 3G Plate Test • 1/2-inch Plate • 3G Position • FCAW (Flux Core) Candidates should arrive prepared to demonstrate...
a near-vision examination of 20/25 (Snellen) at 16 inches, plus or minus 1 inch, with or without corrective lenses. Ability...
: Install, bend, and remove conduit — including 3/4 to 1 inch — to accommodate wiring needs on commercial and industrial... to 1 inch conduit experience preferred. Proficiency in wire pulling and the ability to connect wiring to circuit breakers...
drawings. Experience with steel fabrication drawings, typically 1/4 inch or more. Ability to use a tape measure accurately...
drawings. Experience with steel fabrication drawings, typically 1/4 inch or more. Ability to use a tape measure accurately...
but not limited to ¾ inch drive ratchet & socket sets, box wrench set up to1 ½ inch, ½ inch torque set, ½ inch drive impact tools...
Fabricate, assemble, and rework non-flight hardware including: Cable assemblies Chassis assemblies 19-inch rack systems...
assemblies Chassis assemblies 19-inch rack systems Test fixtures and support equipment Perform advanced cable fabrication...
: Cable assemblies Chassis assemblies 19-inch rack systems Test aids and support equipment Perform wire stripping...